¿Alguien tiene una Wii que no ocupe que la venda baratita?

Darknesshell dijo:

No he logrado pasar de acá

Pero no me rindo.

Haz clic para expandir...

ayn dijo:

Tienes que presionar el "1"


Enviado desde mi iPhone utilizando Tapatalk

Haz clic para expandir...

Darknesshell dijo:

Apretando el botón de reset y después el de power, llego a este otro menú:

Estuve cambiando parámetros por si le atinaba a alguno...pero no.

Haz clic para expandir...

tglaria dijo:

Ese es el Priiloader (logico, sale el nombtr en la misma pantalla), ¿no carga el hombrew channel o el system menu desde ahi?

Si no, ¿a formatear?

Haz clic para expandir...

clusten dijo:

Si vas a “load/install file” que te muestra?

Haz clic para expandir...

Darknesshell dijo:

Creo que me salía archivo no encontrado. A la noche puedo llegar a probar de nuevo.

Haz clic para expandir...

clusten dijo:

Dale.
Al parecer, tendrás que instalar "IOS" limpios primero.
Según recuerdo, el HackMii Installer no corre si es que tu Wii tiene IOS modificados. Lo primero sería instalar IOS limpios, cuidando de no tocar el System Menu y IOS del menu (en tu caso creo que es el IOS70).
Veré si encuentro las herramientas en mi PC (y si es que nintendo aun tiene los IOS limpios en sus servidores)

Haz clic para expandir...

dertio.barcos dijo:

Bye el priiloader se usa para salvarte de un cagaso y va dependiendo de en donde lo instalaron si en el boot 1, que vendría siendo el custom recovery de la wii, ya que por ahí puedes ejecutar apps para reinstalar la nand y otras cosas, si esta en boot 2 mejor ve con cuidado ya que puedes dejar murta la consola si no lo haces debidamente



Enviado desde mi Hisense L675 mediante Tapatalk

Haz clic para expandir...

clusten dijo:

El priiloader es una app, no se instala en boot2 y mucho menos en boot1.
Boot1 no se puede editar, pues:
- boot0 desencriptaba el bloque donde estaba boot1 y comparaba con una firma de solo lectura.
- Si la firma no calzaba, no booteaba.

Por esta misma razon Nintendo no pudo frenar el bootmii de las consolas antiguas, pues no podia actualizar boot1).


Para @Darknesshell
Prueba usando esto:
https://sourceforge.net/projects/modmii/files/ModMii6.4.1.zip/download

El wizard me parece que es claro y el "manual" que genera claro. En caso de cualquier duda, consulta acá. Con esto ya es más facil orientarte (en el sentido que si sigues las instrucciones, tu wii debería quedar con IOS oficiales, salvo los que son para cargar juegos por USB)

Haz clic para expandir...

clusten dijo:

El priiloader es una app, no se instala en boot2 y mucho menos en boot1.
Boot1 no se puede editar, pues:
- boot0 desencriptaba el bloque donde estaba boot1 y comparaba con una firma de solo lectura.
- Si la firma no calzaba, no booteaba.

Por esta misma razon Nintendo no pudo frenar el bootmii de las consolas antiguas, pues no podia actualizar boot1).


Para @Darknesshell
Prueba usando esto:
https://sourceforge.net/projects/modmii/files/ModMii6.4.1.zip/download

El wizard me parece que es claro y el "manual" que genera claro. En caso de cualquier duda, consulta acá. Con esto ya es más facil orientarte (en el sentido que si sigues las instrucciones, tu wii debería quedar con IOS oficiales, salvo los que son para cargar juegos por USB)

Haz clic para expandir...

Spoiler

Guide Generated by ModMii v6.4.1 on 11-09-2017 - 20:27

ModMii for Windows
by XFlak
This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!

1. • Your chosen options
   
   This guide was generated using the following parameters:
   • Install and\or update all recommended softmods
   • Current System Menu is 4.2U
   • Desired System Menu is 4.2U
   • Install Photo Channel
   • Install Internet Channel
   • Install Weather Channel
   • Install News Channel
   • Install Mii Channel
   • Install Shopping Channel (and IOS56)
   • Install Wii Speak Channel
   • Update active IOSs (can be disabled in options)
   • Do not Install a cMIOS (can be enabled in options)
   • Install a USB-Loader Forwarder Channel (can be disabled in options)
   • www.sites.google.com/site/completesg/
   • 
     
     Requirements: an SD or SDHC card
     Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf.
     Note: If it doesn't work for you, visit http://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.
     
     
     
     
     This runs the Hackmii Installer. Use the installer to install the Homebrew Channel (HBC) and Bootmii as IOS and Bootmii as Boot2 (if possible).
     Note: If you get a "no vulnerable IOS" error message, run ModMii again and this time select the "Hackmii Solutions" option and follow the new instructions before continuing this guide.
   • Making a NAND backup
   
   
   
   
   While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
   Press the power button on the Wii 3 times to get to the last option, then press the reset button (you can also navigate with a Gamecube controller).
   Press reset to choose the first option, then follow the directions on the screen to make your NAND backup (bad blocks are no problem).
   Backup the Bootmii folder, nand.bin, and keys.bin elsewhere and erase from the SD card (or rename it). You'll need these in case of emergencies, so don't lose them.
   Go back to The Homebrew Channel.
   Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.
   
   • Install a patched IOS236
   
   
   Start the Homebrew Channel.
   
   VERY IMPORTANT!
   In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You should wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps may error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.
   
   You only need to perform ONE of the below methods.
   Once either method successfully installs IOS236, you can move onto the next step.
   
   • Method A: Using IOS236 Installer
     
     
     
     
     After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".
     Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.
     It should say "IOS236 installation is complete!" and return to The Homebrew Channel.
     
     If you experience errors, keep trying and it should eventually work.
     If you continue to experience errors you can try using Simple IOS Patcher instead.
     
   • Method B: Using Simple IOS Patcher
     
     
     
     
     After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "Simple IOS Patcher".
     Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.
     Choose "IOS36" (already selected by default) and push A, then select "Install IOS to slot" and choose 236. Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A, then choose "Load IOS from SD card". Confirm your choice with the A button and, when prompted, push A to continue the installation. When the installation is finished press the B button to exit the Main Menu.
     
     If you experience errors, keep trying and it should eventually work.
     If you continue to experience errors you can try using IOS236 Installer instead.
   • Install Priiloader
   
   
   
   
   Launch "Priiloader 236 Mod" via the Homebrew Channel
   After the Priiloader Installer loads, press + to install it.
   After successfully installing Priiloader, access it by powering off the Wii, then powering it back on while holding reset until you see the Priiloader menu.
   You should install some system menu hacks now (by going to System Menu hacks option).
   
   RECOMMENDED HACKS
   • Block Disc Updates
   • Block Online Updates
   • Replace Health Screen
   • Move Disc Channel
   
   The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.
   
   One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
   For details on how to do so, visit www.sites.google.com/site/completesg/system-hacks/priiloader
   
   • Install WADs
   
   
   
   
   Load Multi-Mod Manager (MMM) via the HomeBrew Channel.
   If IOS236 is not already loaded, select "Load another IOS", then select IOS236
   Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)
   
   In Multi-Mod Manager's main menu, go down to select "WAD Manager".
   Install the following WADs from the WAD folder (this list of WADs is unique to the information you provided ModMii).
   Be careful not to install any additional WADs that may have been previously saved in this folder (they may be safe, but I cannot say for sure).
   
   Mark each of the following WADs for installation by navigating to each WAD and hitting "+"
   Alternatively, you can hold "+" for 2 seconds to select all the WADs in the folder.
   After you've marked all the WADs listed below, press 'A' twice to install them.
   
   If any files fail to install properly, they will remain marked for installation, so just retry installing those files.
   
   Your unique list of WADs to install are as follows:
   • IOS11v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS20v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS30v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS40v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS50v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS52v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS60v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS70v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • IOS80v16174(IOS60v6174[FS-ES-NP-VP-DIP])
   • cIOS202[60]-v5.1R
   • cIOS222[38]-v4
   • cIOS223[37-38]-v4
   • cIOS224[57]-v5.1R
   • cIOS249[56]-d2x-v8-final
   • cIOS250[57]-d2x-v8-final
   • Mii-Channel-NUS-v6
   • Photo-Channel-1.1-NUS-v3
   • Shopping-Channel-NUS-v21
   • Opera-Internet-Channel-NUS
     [*]Weather-Channel-NUS-v7
     [*]NEWS-Channel-NUS-v7
     [*]Wii-Speak-Channel-NUS
     [*]RVL-mios-v10
     [*]IOS9-64-v1034
     [*]IOS12-64-v526
     [*]IOS13-64-v1032
     [*]IOS14-64-v1032
     [*]IOS15-64-v1032
     [*]IOS17-64-v1032
     [*]IOS21-64-v1039
     [*]IOS22-64-v1294
     [*]IOS28-64-v1807
     [*]IOS31-64-v3608
     [*]IOS33-64-v3608
     [*]IOS34-64-v3608
     [*]IOS35-64-v3608
     [*]IOS36-64-v3608
     [*]IOS37-64-v5663
     [*]IOS38-64-v4124
     [*]IOS41-64-v3607
     [*]IOS43-64-v3607
     [*]IOS45-64-v3607
     [*]IOS46-64-v3607
     [*]IOS48-64-v4124
     [*]IOS53-64-v5663
     [*]IOS55-64-v5663
     [*]IOS56-64-v5662
     [*]IOS57-64-v5919
     [*]IOS58-64-v6176
     [*]IOS61-64-v5662
     [*]IOS62-64-v6430
     [*]USBLoader(s)-ahbprot58-SD-USB-v11b-IDCL
     
   
   
   The above underlined forwarder channel will load the first file it finds from the following list:
   
   • SD+USB:\apps\usbloader\boot.dol
   • SD+USB:\apps\usbloader\boot.elf
   • SD+USB:\apps\usb-loader\boot.dol
   • SD+USB:\apps\usb-loader\boot.elf
   • SD+USB:\apps\usbloader_cfg\boot.dol
   • SD+USB:\apps\usbloader_cfg\boot.elf
   • SD+USB:\apps\WiiFlow\boot.dol
   • SD+USB:\apps\WiiFlow\boot.elf
   • SD+USB:\apps\usbloader_gx\boot.dol
   • SD+USB:\apps\usbloader_gx\boot.elf
   
   Note: IOS58 is required for the forwarder to launch apps from an SD Card and hard drives formatted as FAT32, NTFS, ext2, ext3 and ext4. It also supports meta.xml arguments and is able to launch apps with direct hardware access.
   
   
   • Reinstall the Homebrew Channel (if applicable)
   
   
   
   
   
   In the HomeBrew Channel, hit the "home" button. In the top right corner you will see the IOS used by the HBC.
   If the HBC is using IOS58 and your HBC is not upside-down, you can skip this step.
   
   If the HBC is not using IOS58 or it is upside-down, you should continue with this step to reinstall it.
   
   
   
   
   Launch the HackMii_Installer via the HBC.
   Use the Hackmii Installer to fix/re-install the HBC (using IOS58). Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.
   If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the first Step.
   
   

• Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application.

• For those without internet on their Wii, check out this list of Homebrew applications.

Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)

• HERE
  Check out my Top Channels
  Check out my Crazy Intro Videos

Darknesshell dijo:

Gracias.

A la noche reviso si hay un archivo para copiar.

¿Y cómo corro el bannerbomb?

Haz clic para expandir...

tglaria dijo:

Según tu propio manual (el que te generó el programa): "Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf."

Acá un tutorial de cómo cargar bannerbomb.

Haz clic para expandir...